Group: rec.autos.makers.chrysler
Dodge, Plymouth, Jeep, Eagle, etc info/talk.
Add group to favorites
Back to group list
Send new message to group Search:
From: Jeff Kolodziej - 14 Jul 2008, 19:20
Dodge experts: I have a 1995 Dodge Ram 1500 regular cab 4WD pickup with the 5.9L V8. The truck has a little over 91K miles on it, and the amber "ABS" light is now coming on. When the ABS light comes on, the red "BRAKE" light comes on too. I replaced the front disc brakes at 87K miles (rear brakes are original), and I checked the brake fluid level (and...
2 Posts. Last post send by: Jeff Kolodziej - Monday 14 Jul
From: redcoyote333 - 14 Jul 2008, 07:22
Hi , we have got a 1999 Chrysler Grand Voyager 3.3 LE in good condition but with no power to the cigarette lighter/rear aux power socket. :cry: Checked both fuse boxes and both look 100%. No reference to the said fuse in either fuse boxes or even the Chilton manual?! Pulled out lighter housing from dash and red and black wiring to it but no voltage....
3 Posts. Last post send by: redcoyote333 - Monday 14 Jul
From: Steve L - 14 Jul 2008, 05:07
My reverse lights are not working. The bulbs have been replaced and the fuse(s) are fine. I am guessing it is the switch. Where is it located? Thank you!
2 Posts. Last post send by: Steve L - Monday 14 Jul
From: jaygreg - 13 Jul 2008, 21:31
I've got the buzzing every time the door locks so judging from complaints I've read in a few forums, it looks like I need a new actuator ... and may be in for a few more failures rather soon (92,000 miles). A friend of mine with a GM product replaced his recently and got his new part on eBay for about $50. There's a supplier offering Mopar for about $100....
6 Posts. Last post send by: jaygreg - Sunday 13 Jul
From: Bob Shuman - 13 Jul 2008, 18:55
Issue is with a 1999 Chrysler Town & Country Limited Van w/90K miles. The brakes worked perfectly before I had the master cylinder replaced. This was done strictly as a preventative measure since the service place I used noted a "slight leak". The brakes seemed to work fine for several hundred miles and then after they were used , the brake pedal got...
15 Posts. Last post send by: Bob Shuman - Sunday 13 Jul
From: Phillip Mcracken - 10 Jul 2008, 08:35
The headlights are yellowed up pretty bad on my 97 avenger. Does anyone recommend any particular headlight restoration product and or technique?
3 Posts. Last post send by: Phillip Mcracken - Thursday 10 Jul
From: Denny B - 09 Jul 2008, 15:56
To change the serpentine belt on a Dodge Caravan year 2006 3.3L with A/C. Do you just release the tension on the Tensioner pulley, and slip the belt off the other pulleys, or do you have to physically remove the tensioner pulley? I am aware to pay attention to the tension on the tension pulley and not let it unwind. As I observe a picture of the pulley...
5 Posts. Last post send by: Denny B - Wednesday 09 Jul
From: Dr. David Zatz - 09 Jul 2008, 07:34
Archive-name: autos/chrysler-faq/general/part1 Posting-Frequency: 15 days Last-modified: 2007/6/26 Version: 6 This section is generally revised every 300 days. - - - - - - - - - - - - IMPORTANT. Do not attempt to respond to faq@allpar,com . Due to spam this address DOES NOT GO ANYWHERE. Instead, go to allpar,com and provide feedback from there. ...
1 Posts. Last post send by: Dr. David Zatz - Wednesday 09 Jul
From: virig - 07 Jul 2008, 14:38
Porsche CGT vs. Pagani Zonda Video Take a look… http :// www .thecarsblog.info/2008/07/porsche-cgt-vs-pagani-zonda.html
0 Reply
From: Piperson - 06 Jul 2008, 15:51
I need a wire harness for the front turn signal/emergency/side marker for a 1999 Chrysler T&C Limited. The part number on the (approx. 30") cable is 4707837AA 17778C. Can anyone please point me to a source other than the dealer?
4 Posts. Last post send by: Piperson - Sunday 06 Jul
From: QX - 06 Jul 2008, 14:35
I have noticed that the black vinyl bumper protector is lifting at the center, especially when the car sits out in the sun. The dealer says he'll have to order another strip to correct the problem (I was thinking just a little contractor's cement would work, but the fix is his choice). Is anyone else having this problem? I've seen several others on the...
2 Posts. Last post send by: QX - Sunday 06 Jul
From: mr158912 - 04 Jul 2008, 16:45
has anyone used viper v10 rocker arms on a 5.9 engine?? what year did you use ? did it matter?
0 Reply
From: Archet - 04 Jul 2008, 09:18
Is anyone running with E85 in TC 2.5l 1990'? If so , what do you have modified? spark plugs? computer.... I do since a month E85 2.02 $/gal and fuel 95 3.7 $/gal in Franceeven if i need more E85 ~ 10% it 's a smal advantage. Stéphane Thuillier Avignon France
0 Reply
From: Archet - 04 Jul 2008, 09:04
Hello, since a month I run in France with my town and country 2.5l 1990' van With E85 fuel. I' ve take a look to my spark plugs, and I tnk they are dangerously withe. Too hot emission gas. The preconized spark plugs for my TC van are Champion RN 12 YC Denso W16EPR U11 NGK BPR5 ES. Many dealers prefer BPR6 ES. Do you think BPR6 are suffisant are...
0 Reply
From: njoracle - 02 Jul 2008, 00:21
When I make a right turn there is a "thump" or "crack" sound ONLY after stepping on the brake. All of the body mount bushings were replaced a couple of years ago so I don't think it is that. Any ideas on where to look for this "noise"? Concorde '96 LX 150k miles 3.3 engine
2 Posts. Last post send by: njoracle - Wednesday 02 Jul
