Add group to favorites
Back to group list
Send new message to groupFrom: The Older Gentleman - 10 Feb, 20:07
http://news.bbc.co.uk/1/hi/business/7232357.stm Quite interesting. Especially for Krusty, I have no doubt. -- BMW K1100LT Ducati 750SS Honda CB400F & SL125 GAGARPHOF#30 GHPOTHUF#1 BOTAFOT#60 ANORAK#06 YTC#3 BOF#30 WUSS#5 The bells, the bells..... chateau dot murray at idnet dot com
90 Posts. Last post send by: The Older Gentleman - Sunday 10 Feb
From: seabreeze - 09 Feb, 13:17
Hi. My xv535 wouldn't start the other week. It was taking a little while for the front cylinder to fire the last few times I started it. Rear cylinder was fine. I've taken off the carbs and cleaned the jets, checked the float needle valve is working, and generally it all seems ok. Couldn't get into the diaphram part because my torx key wouldn't fit the...
15 Posts. Last post send by: seabreeze - Saturday 09 Feb
From: beatlejuice - 09 Feb, 02:44
taking the leap from street rodding to motorcycles, i just purchased my first bike, a '93 honda shadow 600 VLX and ready to start customizing...What i need is information on what risers will work on this bike so i can put some ape hangers on 'er. any info would be deeply appriciated -- Message posted using http://www.talkaboutmotorcycles.com/group/rec.motorcycles.tech/ More...
3 Posts. Last post send by: beatlejuice - Saturday 09 Feb
From: MadDogR75@yahoo.com - 05 Feb, 23:19
Looking for gasket set and liners for Yamaha 650 rebuild project. Any suggestions?
5 Posts. Last post send by: MadDogR75@yahoo.com - Tuesday 05 Feb
From: Paul - 31 Jan, 21:51
Hi, Why am I reading all this MI5 crap on the motorbikes site? Plse can you remove it all. Thanks
12 Posts. Last post send by: Paul - Thursday 31 Jan
From: George Orwell - 29 Jan, 23:54
It doesn't make any difference how much weight is used so long as half is on the left and half on the right side of the rim or else you will incur dynamic imbalance. Are you sure no liquid sealant has been introduced into the tube? Any liquid will seek the greatest radius and sit there, imblancing the assembly. Il mittente di questo messaggio|The sender...
0 Reply
From: Bush - 29 Jan, 01:29
HI a buddy has a 1994 Kawasaki KDX 400 four stroke and is trying to get his carb straightened out. After replacing the float needle and seat, he replaced the float and set it level to the carb body. Testing the float statically with the bowl off, the fuel appeared to shut of as you raised the float toward the body, with still 1/4" to go. After installing...
4 Posts. Last post send by: Bush - Tuesday 29 Jan
From: steve - 28 Jan, 00:08
What should output on this be?I'm getting 14 volts.Will this blow out the headlight?Thanks
4 Posts. Last post send by: steve - Monday 28 Jan
From: Tumbleweed - 27 Jan, 23:50
Greetings, Am trying to remove the torx scrrews on my clutch inspection cover on my side case, What is the best type of easy out to use that will easily grip and remove these stripped screws? Thanks, Bruce
6 Posts. Last post send by: Tumbleweed - Sunday 27 Jan
From: painter6 - 23 Jan, 03:20
Hi all. I picked up a Honda CA160. Local Honda shop says CA160 take a 12 volt battery, all my lights are 6 volt. Can some one help. Vin on frame is CA160- 1011694. I'm geting ready to tear my hair out. Need year, and battery size. Thanks all. Paul.
10 Posts. Last post send by: painter6 - Wednesday 23 Jan
From: Manjo - 21 Jan, 21:03
Is there a DIY method to measure the flow-rate of coolant through a motorcycle radiator? My bike is 12 years old and I'm wondering if there's been enough scale build-up in the radiator fins to reduce flow- rate and the water-cooling efficiency of the radiator. I've looked in the bike service manual and it gives no information on how to test for flow rate....
21 Posts. Last post send by: Manjo - Monday 21 Jan
From: stellad - 19 Jan, 09:02
today message : 1. A short pencil is better than a long memory. 2. A successful man is one who can lay a firm foundation with the bricks that others throw at him. %%%%%%%%%%%%%%%%%%%% http://padmagirl.blogspot.com %%%%%%%%%%%%%%%%%%%%% thank you god bless you with regards rathi
0 Reply
From: B. Peg - 17 Jan, 23:28
Had to put nearly 3 ounces (85 grams) of weights on an Avon Storm tire to get it to static balance. Seemed like a lot of weight for a premium tire. Anyone had similar experience? Dealer said I shouldn't have to balance it since most motorcycle tires are pretty much balanced from the manufacturer. Not to doubt him, but that seems a stretch. B...
7 Posts. Last post send by: B. Peg - Thursday 17 Jan
From: deadmanwalking - 13 Jan, 06:03
Can anybody post a link of a wiring diagram for a 84 suzuki 1200 Mine is not firing, no spark at the plug
8 Posts. Last post send by: deadmanwalking - Sunday 13 Jan
From: "booboo_£_¥_0/00_:)" - 08 Jan, 22:21
Why can't you get a hammer head for an air hammer. All I can find is chisels and more chisels, no hammers. I want to drive roll pins and drive nails. Why do they call it an air 'hammer' if you can't hammer with it? -- Booboo ? 3 :) 7/8
4 Posts. Last post send by: "booboo_£_¥_0/00_:)" - Tuesday 08 Jan
