Add group to favorites
Back to group list
Send new message to group Search:
From: cliffsarrel@hotmail,com - 09 Jul 2008, 06:14
does anyone know the clearence for exhaust and intake in thousandths on a yam 750 1981 seca c
2 Posts. Last post send by: cliffsarrel@hotmail,com - Wednesday 09 Jul
From: cliffsarrel@hotmail,com - 08 Jul 2008, 21:36
what brand carb originally came on the bike? i thought i read hs-32 somewhere.does that ring a bell?
0 Reply
From: cliffsarrel@hotmail,com - 08 Jul 2008, 06:20
the importance of a properly functioning petcock on an older bike is monstrous. most old ones leak when off-just enough to build up gasoline in your OIL-BEWARE.... question-should i rebuild mine or get a new one for a 1981 xj750 seca if new-where???? peace
9 Posts. Last post send by: cliffsarrel@hotmail,com - Tuesday 08 Jul
From: cliffsarrel@hotmail,com - 08 Jul 2008, 06:02
i want to know from what rpm- what rpm the idle jets have an effect on performance.when you take off from a dead stop and it bogs a little,could that be idle jet related? after 3000 rpm the bike runs great,however,after a 15 min.ide,i pull the plugs and they are sooty-not wet.only the #1 cyl is not sooty adjusting the air screws does not seem to make much...
2 Posts. Last post send by: cliffsarrel@hotmail,com - Tuesday 08 Jul
From: highreach - 07 Jul 2008, 21:22
I have a 2001 1200 bandit that likes to beat me up once in a while. I like the bike and the power it has, but it seems a little rigid for me. I’m 6’ tall and weight about 155lbs. So i’m a bit light for the bike. I’ve had the bike for a couple years now, and the suspension seems to hold me back. Springs and valving could do the job if i can find someone...
1 Posts. Last post send by: highreach - Monday 07 Jul
From: ericngsta@gmail,com - 07 Jul 2008, 18:36
Hi. I have a '78 cb400t. Just cleaned the carbs and as about to put them back in when i discovered that one of the throttle cables broke (there are two). My question is do I need the second cable at all? When I turn the throttle it pulls on the good cable and returns when i pull on the good cable on the carb end. If i do need that second cable, where...
3 Posts. Last post send by: ericngsta@gmail,com - Monday 07 Jul
From: cliffsarrel@hotmail,com - 05 Jul 2008, 04:38
does anyone know what size main jets i should run at 6,000ft above sea level?
1 Posts. Last post send by: cliffsarrel@hotmail,com - Saturday 05 Jul
From: FONSECA1969 - 03 Jul 2008, 08:09
Hi every body I work repairing scooters at a workshop in downtown Miami. If you are in trouble with your scooter and need my service. Call me and I ll be glad to know about you. Cell 786 399 6008. Fonseca
0 Reply
From: ian field - 02 Jul 2008, 16:24
Any recommendations for UK tyre dealers? Looking for cheap as possible - but not quite as cheap as Cheng Shin! TIA.
16 Posts. Last post send by: ian field - Wednesday 02 Jul
From: thatch - 02 Jul 2008, 02:33
can anyone help me ? my cycle clutch will pressure up after riding approx 20 miles i have to crack the line loose in order to relieve the pressure so clutch dont slip after about 20 more miles it happens again. whats up????
2 Posts. Last post send by: thatch - Wednesday 02 Jul
From: Rob Kleinschmidt - 01 Jul 2008, 19:49
Searching for sources for odd electrical connectors used on late '80s BMW airheads and probably other German cars. Any good online sites and catalogs much appreciated. My most recent problem is a three pin connector between the Hall ignition cannister and the ICU. Mating rectangular connector housings with three flat pins and an external spring clip that...
1 Posts. Last post send by: Rob Kleinschmidt - Tuesday 01 Jul
From: warren weber - 30 Jun 2008, 16:54
Going to send some stuff as seen on rec.motorcycles.tech. Will be several e mails. Dad
6 Posts. Last post send by: warren weber - Monday 30 Jun
From: GP - 30 Jun 2008, 16:41
I have a 1982 KZ-750 E (4 cylinder) that runs great. I am having a problem with hot starting. When the bike is cold, the starter cranks the engine over Ok, and the bike starts well. After riding the bike for a while (10-20 minutes) if I shut the engine off, the starter will not crank the engine over. It tries to crank, but it just doesn't have enough power...
13 Posts. Last post send by: The Older Gentleman - Monday 30 Jun
From: Thomas-ex500 - 29 Jun 2008, 06:55
Hello everyone, I'm need of some minor help!!! I have a 93 ex500 I purchased in 95 well a week later i let a friend ride it and needless to say he crashed it into a house, from that point i picked up the pieces and brought it all home and tried to start it but i could never get any spark out of the right side coil, and being i had no cash on hand to fix it...
11 Posts. Last post send by: Thomas-ex500 - Sunday 29 Jun
From: challyce@hotmail,com - 29 Jun 2008, 01:05
CAN SOMEONE WALK ME THROUGH REPLACING TWO POINTS ON THE 78 YAMAHA XS400?. THANKS IN ADVANCE
5 Posts. Last post send by: challyce@hotmail,com - Sunday 29 Jun
