Chop ya brain out chop!

Chop ya brain out chop!

After I wandered out of the Appleton lab I wandered into the navel dockyard
just next door to my university where I got me degree (Portsmouth 1969) and
asked if they would like a fusion rector like the one we just made at work
that blew up and just after we done it we got banged on the head and the
unit smashed by neo luddites, I said it was too dangerous for commercial
use.



The doc chopped me brain out as I am a worker.



But I sort of got over it.



In about 1971



I asked the skilled navel engineers in blue shirts and evil smiling faces to
make a pyrex toroid one foot wide with a tube size of 2 inches. I said it
needs heavy wires round it to take 500 amps but they needes holes down the
middle to take cooling water (they said thems called pipes) and we needed
only 5 turns around the toroid evenly spaced. The walls should be 1/8" and
the pipes 1/2" diameter.



Water needs to be passed through as a steady flow to keep the unit cool.



We needed a thick 1/4" plate copper capacitor with four plates 1 foot by 1
foot and five plates 1 foot by one foot glued into to perpex sheet 1/4"
thick to make a capacitor. The tubes should be welded with copper metal to
the capcitor plates with the tubes connecting the plates four on one and
five on the other to make a tuned circuit.



Two tubes should be taken from the capacitor terminals with a ball of copper
2.5" diameter at the ends separated by 1" in air.



The toroid should be evacuated and then filled with hydrogen gas at 3mm
mercury pressure.



To start the reaction a car battery needs to be connected using 300 amp wire
to the capacitor through a 300 amp diac with a capacitor and resistor and
push button togive a pulse of 300 amp into the coil.



The plasma ball will ignite and a oscillating current will flow with the
peak voltage limited by the spark gap.



The voltage is about 3 KV and the current 300 amps gives a maximum power of
900Kw.



This is taken by another winding for use as a power source.



This is an experimental result and there in no theory.



Normal electromagnetism says it does not work.



To understand it the photon and relativity model of electromagnetism must be
used.



It is not used because the church banned it 300 years ago because of their
superstition about trapping a sun in a bottle. The theory they worked out
made it impossible. I do not understand what they are afraid of the yield is
limited by the amount of hydrogen in the tube in the event of a containment
breakdown. This is likely.

To make it safe it must be in a concrete bunker.



The spark gap limiter may be replaced by a low voltage system with a 10
million amp shunt transistor regulator.



A smaller version for domestic use is shown on my web site.



http :// www .newelectricity.myphilosophy.eu/



I did work at CERN on the bubble pictures and was in Switzerland for a
while.



I was rewarded for my work with a frontal lobotomy and life in a cot being
spoon fed.



I, did eventually recover and when doing my MSc (fail) my practical work
(designing 3 d radar) was in Murmansk after being picked up when me AWAC got
blown up while on industrial training at Lincoln when the bear crossed the
red line on their atom bombing walk round England in1973. Our sidewinders
took em all out and their burning wings rolled down into the North Sea then
the Ruski's picked me up.





Then they chopped me brain out again.

There is no magnetism. North is South. East is West.

PureGold wrote:

> After I wandered out of the Appleton lab I wandered into the navel
> dockyard just next door to my university where I got me degree (Portsmouth
> 1969) and asked if they would like a fusion rector like the one we just
> made at work that blew up and just after we done it we got banged on the
> head and the unit smashed by neo luddites, I said it was too dangerous for
> commercial use.
>
>
>
> The doc chopped me brain out as I am a worker.
>
>
>
> But I sort of got over it.
>
>
>
> In about 1971
>
>
>
> I asked the skilled navel engineers in blue shirts and evil smiling faces
> to make a pyrex toroid one foot wide with a tube size of 2 inches. I said
> it needs heavy wires round it to take 500 amps but they needes holes down
> the middle to take cooling water (they said thems called pipes) and we
> needed only 5 turns around the toroid evenly spaced. The walls should be
> 1/8" and the pipes 1/2" diameter.
>
>
>
> Water needs to be passed through as a steady flow to keep the unit cool.
>
>
>
> We needed a thick 1/4" plate copper capacitor with four plates 1 foot by 1
> foot and five plates 1 foot by one foot glued into to perpex sheet 1/4"
> thick to make a capacitor. The tubes should be welded with copper metal to
> the capcitor plates with the tubes connecting the plates four on one and
> five on the other to make a tuned circuit.
>
>
>
> Two tubes should be taken from the capacitor terminals with a ball of
> copper 2.5" diameter at the ends separated by 1" in air.
>
>
>
> The toroid should be evacuated and then filled with hydrogen gas at 3mm
> mercury pressure.
>
>
>
> To start the reaction a car battery needs to be connected using 300 amp
> wire to the capacitor through a 300 amp diac with a capacitor and resistor
> and push button togive a pulse of 300 amp into the coil.
>
>
>
> The plasma ball will ignite and a oscillating current will flow with the
> peak voltage limited by the spark gap.
>
>
>
> The voltage is about 3 KV and the current 300 amps gives a maximum power
> of 900Kw.
>
>
>
> This is taken by another winding for use as a power source.
>
>
>
> This is an experimental result and there in no theory.
>
>
>
> Normal electromagnetism says it does not work.
>
>
>
> To understand it the photon and relativity model of electromagnetism must
> be used.
>
>
>
> It is not used because the church banned it 300 years ago because of their
> superstition about trapping a sun in a bottle. The theory they worked out
> made it impossible. I do not understand what they are afraid of the yield
> is limited by the amount of hydrogen in the tube in the event of a
> containment breakdown. This is likely.
>
> To make it safe it must be in a concrete bunker.
>
>
>
> The spark gap limiter may be replaced by a low voltage system with a 10
> million amp shunt transistor regulator.
>
>
>
> A smaller version for domestic use is shown on my web site.
>
>
>
> http :// www .newelectricity.myphilosophy.eu/
>
>
>
> I did work at CERN on the bubble pictures and was in Switzerland for a
> while.
>
>
>
> I was rewarded for my work with a frontal lobotomy and life in a cot being
> spoon fed.
>
>
>
> I, did eventually recover and when doing my MSc (fail) my practical work
> (designing 3 d radar) was in Murmansk after being picked up when me AWAC
> got blown up while on industrial training at Lincoln when the bear crossed
> the red line on their atom bombing walk round England in1973. Our
> sidewinders took em all out and their burning wings rolled down into the
> North Sea then the Ruski's picked me up.
>
>
>
>
>
> Then they chopped me brain out again.

I've known for some time there is no magnetism. It's current and current.
Except you have it wrong. Current warps space and the warp is in some
directions independent of a moving wire (See N machine) and that's why your
formulas are off. It's warp technology and we're not supposed to know about
it so put it away, forget, and be a good little slave.

We can't have every Tom, Dick and Harry running all over the universe in
their private space craft or we'd never be able to tax them!