Add group to favorites
Back to post list
Send new message to group Search:
Post Subject:
LEDs for Triaxis
LEDs for Triaxis
A couple of the seven-segment LED displays in my triaxis have segments that
don't work. Does anyone know where I can find replacements and/or what the
part number is?
Thanks,
Rich
A couple of the seven-segment LED displays in my triaxis have segments that
don't work. Does anyone know where I can find replacements and/or what the
part number is?
Thanks,
Rich
Re: LEDs for Triaxis
"Richard Lueck" <richlueckATcfl.rr,com > wrote in message
news:Xns98CE64A1CC345richlueckATcflrrcom@66.250.146.128...
>A couple of the seven-segment LED displays in my triaxis have segments that
> don't work. Does anyone know where I can find replacements and/or what the
> part number is?
>
> Thanks,
> Rich
Have you checked the solder side of the PCB for dry joints? LED failure is
actually quite rare.
"Richard Lueck" <richlueckATcfl.rr,com > wrote in message
news:Xns98CE64A1CC345richlueckATcflrrcom@66.250.146.128...
>A couple of the seven-segment LED displays in my triaxis have segments that
> don't work. Does anyone know where I can find replacements and/or what the
> part number is?
>
> Thanks,
> Rich
Have you checked the solder side of the PCB for dry joints? LED failure is
actually quite rare.
Re: LEDs for Triaxis
On Mon, 05 Feb 2007 17:14:28 GMT, "ian field" <dai.ode@ntlworld,com > wrote:
>
>"Richard Lueck" <richlueckATcfl.rr,com > wrote in message
>news:Xns98CE64A1CC345richlueckATcflrrcom@66.250.146.128...
>>A couple of the seven-segment LED displays in my triaxis have segments that
>> don't work. Does anyone know where I can find replacements and/or what the
>> part number is?
>>
>> Thanks,
>> Rich
>
>Have you checked the solder side of the PCB for dry joints? LED failure is
>actually quite rare.
I seem to recall connector issues in those. This was years ago and I dealt with
one, so I'm not sure, but well worth checking first.
Call Mesa for parts, they're pretty good about that.
Ron
On Mon, 05 Feb 2007 17:14:28 GMT, "ian field" <dai.ode@ntlworld,com > wrote:
>
>"Richard Lueck" <richlueckATcfl.rr,com > wrote in message
>news:Xns98CE64A1CC345richlueckATcflrrcom@66.250.146.128...
>>A couple of the seven-segment LED displays in my triaxis have segments that
>> don't work. Does anyone know where I can find replacements and/or what the
>> part number is?
>>
>> Thanks,
>> Rich
>
>Have you checked the solder side of the PCB for dry joints? LED failure is
>actually quite rare.
I seem to recall connector issues in those. This was years ago and I dealt with
one, so I'm not sure, but well worth checking first.
Call Mesa for parts, they're pretty good about that.
Ron
Re: LEDs for Triaxis
RonSonic <ronsonic@tampabay.rr,com > wrote in
news:pohfs2dnt4ijleaq9ac3l1bjqmcqr5slbl@4ax,com :
>
> I seem to recall connector issues in those. This was years ago and I
> dealt with one, so I'm not sure, but well worth checking first.
>
> Call Mesa for parts, they're pretty good about that.
>
> Ron
>
Are the LEDs in sockets? If not, which connector are you refering to?
I guess I can open it up and check all connections. I should open it up and
spray some contact cleaner in the output pot anyway, it crackles some when
I turn it.
Thanks for your help,
Rich
RonSonic <ronsonic@tampabay.rr,com > wrote in
news:pohfs2dnt4ijleaq9ac3l1bjqmcqr5slbl@4ax,com :
>
> I seem to recall connector issues in those. This was years ago and I
> dealt with one, so I'm not sure, but well worth checking first.
>
> Call Mesa for parts, they're pretty good about that.
>
> Ron
>
Are the LEDs in sockets? If not, which connector are you refering to?
I guess I can open it up and check all connections. I should open it up and
spray some contact cleaner in the output pot anyway, it crackles some when
I turn it.
Thanks for your help,
Rich
Re: LEDs for Triaxis
"ian field" <dai.ode@ntlworld,com > wrote in
news:UBJxh.237$mn2.90@newsfe7-win.ntli,net :
> Have you checked the solder side of the PCB for dry joints? LED
> failure is actually quite rare.
>
>
I will open it up and check for that as well, thanks for the advice,
Rich
"ian field" <dai.ode@ntlworld,com > wrote in
news:UBJxh.237$mn2.90@newsfe7-win.ntli,net :
> Have you checked the solder side of the PCB for dry joints? LED
> failure is actually quite rare.
>
>
I will open it up and check for that as well, thanks for the advice,
Rich
