Add group to favorites
Back to post list
Send new message to group Search:
Post Subject:
MIDI Pedal
MIDI Pedal
Howdy,
I'm trying to make a list (for comparison shopping!) of which MIDI
pedals are capable of sending out multiple program changes with one
program change. Ferzample, you press 17, and it sends 18 on channel 1
and 22 on channel 2.
The only one I've seen right away is the Behringer FCB1010
Any others? Discontinued models would be fine, too.
Thanks,
--
Oliver Sampson Support Indie Music!
olsam@quickaudio . com * cdbaby . com /group/mrsampson
* w w w .oliversampson . com
Howdy,
I'm trying to make a list (for comparison shopping!) of which MIDI
pedals are capable of sending out multiple program changes with one
program change. Ferzample, you press 17, and it sends 18 on channel 1
and 22 on channel 2.
The only one I've seen right away is the Behringer FCB1010
Any others? Discontinued models would be fine, too.
Thanks,
--
Oliver Sampson Support Indie Music!
olsam@quickaudio . com * cdbaby . com /group/mrsampson
* w w w .oliversampson . com
Re: MIDI Pedal
Oliver Sampson wrote:
> Howdy,
> I'm trying to make a list (for comparison shopping!) of which MIDI
> pedals are capable of sending out multiple program changes with one
> program change. Ferzample, you press 17, and it sends 18 on channel 1
> and 22 on channel 2.
>
> The only one I've seen right away is the Behringer FCB1010
I have the 1010 manual, but didn't notice it'll send out more than one
PC. Are you sure about this?
You might wanna go to
* launch.groups.yahoo . com /group/fcb1010_uno/messages
and check the UNO software prom. It adds extra functionality like
PC/stompmode button splitting; not sure it's what you want. YMMV..
Actually, I have more need for being able to have a stomp mode button
send 4-5 changes, i.e. to select delay and chorous on, and increase
volume and distortion a bit, all from a single one button
The only MIDI controller I know of which'll let me do that is the
Rocktron All Access; a very expensive thingy.
The Roland FC200 (I think) seems quite flexible; dunne if it lets you do
the funky stuff you're looking for. Wouldn't be surpriced if it too has
a forum and modded software, though.
Please do get back on the subject if you stumble over something.
I'm still evaluating what I'll do, and will write about it here.
--
Kind regards,
Mogens V.
Oliver Sampson wrote:
> Howdy,
> I'm trying to make a list (for comparison shopping!) of which MIDI
> pedals are capable of sending out multiple program changes with one
> program change. Ferzample, you press 17, and it sends 18 on channel 1
> and 22 on channel 2.
>
> The only one I've seen right away is the Behringer FCB1010
I have the 1010 manual, but didn't notice it'll send out more than one
PC. Are you sure about this?
You might wanna go to
* launch.groups.yahoo . com /group/fcb1010_uno/messages
and check the UNO software prom. It adds extra functionality like
PC/stompmode button splitting; not sure it's what you want. YMMV..
Actually, I have more need for being able to have a stomp mode button
send 4-5 changes, i.e. to select delay and chorous on, and increase
volume and distortion a bit, all from a single one button
The only MIDI controller I know of which'll let me do that is the
Rocktron All Access; a very expensive thingy.
The Roland FC200 (I think) seems quite flexible; dunne if it lets you do
the funky stuff you're looking for. Wouldn't be surpriced if it too has
a forum and modded software, though.
Please do get back on the subject if you stumble over something.
I'm still evaluating what I'll do, and will write about it here.
--
Kind regards,
Mogens V.
Re: MIDI Pedal
Oliver Sampson wrote:
> Howdy,
> I'm trying to make a list (for comparison shopping!) of which MIDI
> pedals are capable of sending out multiple program changes with one
> program change. Ferzample, you press 17, and it sends 18 on channel 1
> and 22 on channel 2.
>
> The only one I've seen right away is the Behringer FCB1010
I have the 1010 manual, but didn't notice it'll send out more than one
PC. Are you sure about this?
You might wanna go to
* launch.groups.yahoo . com /group/fcb1010_uno/messages
and check the UNO software prom. It adds extra functionality like
PC/stompmode button splitting; not sure it's what you want. YMMV..
Actually, I have more need for being able to have a stomp mode button
send 4-5 changes, i.e. to select delay and chorous on, and increase
volume and distortion a bit, all from a single one button
The only MIDI controller I know of which'll let me do that is the
Rocktron All Access; a very expensive thingy.
The Roland FC200 (I think) seems quite flexible; dunne if it lets you do
the funky stuff you're looking for. Wouldn't be surpriced if it too has
a forum and modded software, though.
Please do get back on the subject if you stumble over something.
I'm still evaluating what I'll do, and will write about it here.
--
Kind regards,
Mogens V.
Oliver Sampson wrote:
> Howdy,
> I'm trying to make a list (for comparison shopping!) of which MIDI
> pedals are capable of sending out multiple program changes with one
> program change. Ferzample, you press 17, and it sends 18 on channel 1
> and 22 on channel 2.
>
> The only one I've seen right away is the Behringer FCB1010
I have the 1010 manual, but didn't notice it'll send out more than one
PC. Are you sure about this?
You might wanna go to
* launch.groups.yahoo . com /group/fcb1010_uno/messages
and check the UNO software prom. It adds extra functionality like
PC/stompmode button splitting; not sure it's what you want. YMMV..
Actually, I have more need for being able to have a stomp mode button
send 4-5 changes, i.e. to select delay and chorous on, and increase
volume and distortion a bit, all from a single one button
The only MIDI controller I know of which'll let me do that is the
Rocktron All Access; a very expensive thingy.
The Roland FC200 (I think) seems quite flexible; dunne if it lets you do
the funky stuff you're looking for. Wouldn't be surpriced if it too has
a forum and modded software, though.
Please do get back on the subject if you stumble over something.
I'm still evaluating what I'll do, and will write about it here.
--
Kind regards,
Mogens V.
