Group: rec.autos.4x4

The on and off-road four wheel drive vehicle.

Add group to favorites Add group to favorites
   indietro Back to post list     indietro Send new message to group
Search:

Post Subject:

Where is 1998 Jeep Wrangler Oxygen sensor located?

Reply from: Penguin
Date: 03 Jun 2008, 23:02
Where is 1998 Jeep Wrangler Oxygen sensor located?

Hi All,

I got a 1998 Jeep Wrangler. I got P0138 error and would like to
replace the oxygen sensor.
Can anyone guide me to locate the oxygen sensor?

Thanks,
Pen

Reply from: Tom
Date: 04 Jun 2008, 01:24
Re: Where is 1998 Jeep Wrangler Oxygen sensor located?

in the exhaust pipe, normally between the catalytic converter and muffler.
"Penguin" <Ralph.Lam@gmail . com > wrote in message
news:1524f2af-d71c-44ef-9bd8-d2201821a809@f36g2000hsa.googlegroups . com ...
> Hi All,
>
> I got a 1998 Jeep Wrangler. I got P0138 error and would like to
> replace the oxygen sensor.
> Can anyone guide me to locate the oxygen sensor?
>
> Thanks,
> Pen



Reply from: Herb Leong
Date: 04 Jun 2008, 15:19
Re: Where is 1998 Jeep Wrangler Oxygen sensor located?

In article <1524f2af-d71c-44ef-9bd8-d2201821a809@f36g2000hsa.googlegroups . com >,
Penguin <Ralph.Lam@gmail . com > wrote:
#Hi All,
#
#I got a 1998 Jeep Wrangler. I got P0138 error and would like to
#replace the oxygen sensor.
#Can anyone guide me to locate the oxygen sensor?
#
#Thanks,
#Pen

Look at the end of the exhaust manifold, right before it connects to
the pipe that goes to the cat. Make sure you put some anti-seize
goop on the new sensor's threads before you install it.

/herb

Reply from: Lon
Date: 05 Jun 2008, 03:40
Re: Where is 1998 Jeep Wrangler Oxygen sensor located?

Herb Leong wrote:
> In article <1524f2af-d71c-44ef-9bd8-d2201821a809@f36g2000hsa.googlegroups . com >,
> Penguin <Ralph.Lam@gmail . com > wrote:
> #Hi All,
> #
> #I got a 1998 Jeep Wrangler. I got P0138 error and would like to
> #replace the oxygen sensor.
> #Can anyone guide me to locate the oxygen sensor?
> #
> #Thanks,
> #Pen
>
> Look at the end of the exhaust manifold, right before it connects to
> the pipe that goes to the cat. Make sure you put some anti-seize
> goop on the new sensor's threads before you install it.

And make sure anything you put on that sensor is sensor-safe unless you
can afford to buy two of them.




Login:
  Username:    Password: 
 
   Lost Password? click here!
Thread:
  Tom
   Lon