Add group to favorites
Back to post list
Send new message to group Search:
Post Subject:
To Do list...
To Do list...
OK gang, here's my To Do list...
Install rear locker -Have parts
Install TNT frame stiffeners - In mail, then @ painters
Install AJ's super rails - In mail, then @ painters
Install new Hella 550 fog lamps - Have parts
Install front and rear tow hooks - In mail
Fabricate cowl vent intake - Still designing/fabbing flanges
Front brakes and front axle U joints - Need to buy parts
Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
have balance checked, ect), figure out front driveshaft clearance issue
(more on this later) - Need to buy c-yoke and u joints
Get rear driveshaft converted to CV - In the works
Find/make t-case skid plate - Located one I like
Wheel!!!! - Need gas and time!!
What's on your list?
Carl
OK gang, here's my To Do list...
Install rear locker -Have parts
Install TNT frame stiffeners - In mail, then @ painters
Install AJ's super rails - In mail, then @ painters
Install new Hella 550 fog lamps - Have parts
Install front and rear tow hooks - In mail
Fabricate cowl vent intake - Still designing/fabbing flanges
Front brakes and front axle U joints - Need to buy parts
Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
have balance checked, ect), figure out front driveshaft clearance issue
(more on this later) - Need to buy c-yoke and u joints
Get rear driveshaft converted to CV - In the works
Find/make t-case skid plate - Located one I like
Wheel!!!! - Need gas and time!!
What's on your list?
Carl
Re: To Do list...
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail,com > wrote:
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
On Sep 24, 7:26 pm, "Carl S" <carlsai...@REMOVE.hotmail,com > wrote:
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
In the works of making a cargo carrier for the rear 2" receiver.
Shooting up from the receiver in the bumper to 45 degrees for a foot
and a half, to avoid scraping on road surfaces, i.e., nasty decline
coming out of gas station or to the trail/camp. Of course the
"basket" is in the works but thinking of using BBQ mesh (thick kind),
for bottom, and some 3/4" by 1/2" tube for outside including the upper
supports.
Just finished making a 4 fishing pole holder that fits in place of my
front license plate brackett directly in the 2" front receiver. Works
great for 4 poles minus 1 pole with fishing net for driving or
fishing. :)
Finished up on some tang welding for my 5 gallon blitz tank on the
outside of my upper cargo carrier. (garvin) Rattled to much. Didn't
want to spend the money for the gravin can holders.
For now, if I do anymore, I will probably have to live in my jeep.
Least my wife thinks so. I guess that probably wouldn't be too much
torture. I live in the jeep on the weekends, just trying making it
roomier (is that a word?). :)
Take care and cheers,
Oh yeah, this is on a 05 rubicon. My Dad is the welder. I just turn
bolts. :)
Re: To Do list...
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail,com > wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy shit. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http :// www .teranews,com
On Mon, 24 Sep 2007 19:26:43 -0700, "Carl S"
<carlsaiyed@REMOVE.hotmail,com > wrote:
>OK gang, here's my To Do list...
>
>Install rear locker -Have parts
>
>Install TNT frame stiffeners - In mail, then @ painters
>
>Install AJ's super rails - In mail, then @ painters
>
>Install new Hella 550 fog lamps - Have parts
>
>Install front and rear tow hooks - In mail
>
>Fabricate cowl vent intake - Still designing/fabbing flanges
>
>Front brakes and front axle U joints - Need to buy parts
>
>Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
>have balance checked, ect), figure out front driveshaft clearance issue
>(more on this later) - Need to buy c-yoke and u joints
>
>Get rear driveshaft converted to CV - In the works
>
>Find/make t-case skid plate - Located one I like
>
>Wheel!!!! - Need gas and time!!
>
>What's on your list?
>
>Carl
>
Pretty easy shit. Right now, I have to remove the rear diff cover and
pull the right axle shaft so I can grind off the back of a stripped
stud to get the flat tire off my Wrangler.
My kidlet had a flat whilst borrowing my jeep and whoever had the
wheel off to fix it so I wouldn't know cross threaded a stud putting
it back on.
--
Old Crow "Yol Bolson!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http :// www .teranews,com
Re: To Do list...
Rotate tires before the snow flies
Need more $$$$ to make my list longer - cause you know there is alot to do
:-)
"Carl S" <carlsaiyed@REMOVE.hotmail,com > wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast,com ...
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>
Rotate tires before the snow flies
Need more $$$$ to make my list longer - cause you know there is alot to do
:-)
"Carl S" <carlsaiyed@REMOVE.hotmail,com > wrote in message
news:zL6dna69_IeY72XbnZ2dnUVZ_t6onZ2d@comcast,com ...
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
>
Re: To Do list...
Good luck: http :// www .saturdaybang,com /jeep/#prev
God Bless America, Bill O|||||||O
mailto:LWHughes3rd@aol,com http :// www .billhughes,com /
"Greg" <greglc84@hotmail,com > wrote in message
news:XK8Ki.237480$fJ5.27503@pd7urf1no...
> I have my CJ frame sandblasted and primed sitting in garage, think my
> to-do list is longer then your's.
--
Posted via a free Usenet account from http :// www .teranews,com
Good luck: http :// www .saturdaybang,com /jeep/#prev
God Bless America, Bill O|||||||O
mailto:LWHughes3rd@aol,com http :// www .billhughes,com /
"Greg" <greglc84@hotmail,com > wrote in message
news:XK8Ki.237480$fJ5.27503@pd7urf1no...
> I have my CJ frame sandblasted and primed sitting in garage, think my
> to-do list is longer then your's.
--
Posted via a free Usenet account from http :// www .teranews,com
Re: To Do list...
"Carl S" <carlsaiyed@REMOVE.hotmail,com > wrote
*sounds loke FUN!*
What's on your list?
Carl
My to-do list at the moment:
Wait for hubs to get enough time to get started on my bumper/winch mount.
Help him as much as I can.
Figure out where to mount an auxillary battery for above winch.
Get ol Ajax into the shop to get his grille painted, that will be in the
works tomorrow.
After that, I have to start saving for Christmas... hmm.. maybe I should
make up my Christmas wish list!
Kate
"Carl S" <carlsaiyed@REMOVE.hotmail,com > wrote
*sounds loke FUN!*
What's on your list?
Carl
My to-do list at the moment:
Wait for hubs to get enough time to get started on my bumper/winch mount.
Help him as much as I can.
Figure out where to mount an auxillary battery for above winch.
Get ol Ajax into the shop to get his grille painted, that will be in the
works tomorrow.
After that, I have to start saving for Christmas... hmm.. maybe I should
make up my Christmas wish list!
Kate
Re: To Do list...
Kate,
I have heard of guys turning the battery sideways and installing two
optima's. The optima's are great b/c you can mount them sideways or upside
down and they are much more resitant to shock then a traditional battery.
How's the house project coming?
Carl
"Kate" <svtkate@spam.filter> wrote in message
news:BRAKi.57995$7e6.33856@bignews4.bellsouth,net ...
>
> "Carl S" <carlsaiyed@REMOVE.hotmail,com > wrote
> *sounds loke FUN!*
> What's on your list?
>
> Carl
>
> My to-do list at the moment:
> Wait for hubs to get enough time to get started on my bumper/winch mount.
> Help him as much as I can.
> Figure out where to mount an auxillary battery for above winch.
>
> Get ol Ajax into the shop to get his grille painted, that will be in the
> works tomorrow.
>
> After that, I have to start saving for Christmas... hmm.. maybe I should
> make up my Christmas wish list!
>
> Kate
>
>
>
Kate,
I have heard of guys turning the battery sideways and installing two
optima's. The optima's are great b/c you can mount them sideways or upside
down and they are much more resitant to shock then a traditional battery.
How's the house project coming?
Carl
"Kate" <svtkate@spam.filter> wrote in message
news:BRAKi.57995$7e6.33856@bignews4.bellsouth,net ...
>
> "Carl S" <carlsaiyed@REMOVE.hotmail,com > wrote
> *sounds loke FUN!*
> What's on your list?
>
> Carl
>
> My to-do list at the moment:
> Wait for hubs to get enough time to get started on my bumper/winch mount.
> Help him as much as I can.
> Figure out where to mount an auxillary battery for above winch.
>
> Get ol Ajax into the shop to get his grille painted, that will be in the
> works tomorrow.
>
> After that, I have to start saving for Christmas... hmm.. maybe I should
> make up my Christmas wish list!
>
> Kate
>
>
>
Re: To Do list...
On Sep 24, 9:26 pm, "Carl S" <carlsai...@REMOVE.hotmail,com > wrote:
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
Well, quite a few things:
1) fix electrical delayed start problem
2) replace lower bearing on steering shaft
3) fix rust holes in floor
6) fab rock sliders from 4x4 angle iron
7) convert gas tank to 20 gallons
8) and the things that will be on hold till next summer: lift, SYE and
CV DS.
The Jeep project never ends!
On Sep 24, 9:26 pm, "Carl S" <carlsai...@REMOVE.hotmail,com > wrote:
> OK gang, here's my To Do list...
>
> Install rear locker -Have parts
>
> Install TNT frame stiffeners - In mail, then @ painters
>
> Install AJ's super rails - In mail, then @ painters
>
> Install new Hella 550 fog lamps - Have parts
>
> Install front and rear tow hooks - In mail
>
> Fabricate cowl vent intake - Still designing/fabbing flanges
>
> Front brakes and front axle U joints - Need to buy parts
>
> Rebuild new (boneyard) front driveshaft, (new u joints and centering yoke,
> have balance checked, ect), figure out front driveshaft clearance issue
> (more on this later) - Need to buy c-yoke and u joints
>
> Get rear driveshaft converted to CV - In the works
>
> Find/make t-case skid plate - Located one I like
>
> Wheel!!!! - Need gas and time!!
>
> What's on your list?
>
> Carl
Well, quite a few things:
1) fix electrical delayed start problem
2) replace lower bearing on steering shaft
3) fix rust holes in floor
6) fab rock sliders from 4x4 angle iron
7) convert gas tank to 20 gallons
8) and the things that will be on hold till next summer: lift, SYE and
CV DS.
The Jeep project never ends!
