Re: Clutch + flywheelIn article <g6kqu4$ihi$1@aioe.org>, pws <pwshelton@austin.rr,com > wrote:
> Stephen Toth wrote:
>
> > My '93 now passed to my son has 198,000 on the original clutch.
> > No real slipping, but does get grabby now in wet or very humid weather
> > until warmed up a little.
> >
> > As others have implied, clutch life depends a lot on driver, driver
> > style and hp of the engine.
> >
> > More hp will likely increase slipping at launch, and may cause some
> > slipping on shifts, but the shifting slippage varies with how well you
> > match rpms at shift points.
> >
> > Slippage is what wears the clutch. Less time spent with the clutch in
> > the zone between initial contact and fully loaded will increase clutch
> > life.
>
> Very good description, Stephen,
>
> I once had a diagram bookmarked that showed exactly what the driveline
> is doing when the clutch is used, flywheel contact, etc.
> It would have been helpful when I was learning how to drive a manual and
> I knew far less about the internal workings of a transmission.
>
> My daughter is learning to drive, and I told her that even though she
> wants an automatic, she should learn manual.
>
> The boosted '91 with the Act3 clutch should be a good training platform.
> If she can master that clutch, she will be able to drive almost anything.
>
> Pat
Not sure what the Act3 clutch disc is. If it is the unsprung clutch
disc it is certainly a training tool.
Have only driven a 6 disc unsprung clutch disc a little on a Turbo RX-7.
Launches are a real exercise in getting the right rpm to launch
smoothly depending on conditions and car attitude. (Flat, uphill, dry,
wet, etc.)
Subsequent sifts just require good matching of rpm to road speed.