Re: How to get rid of smell in carpet??Elle wrote:
> Start with "Febreze," available in the detergents section of
> your grocery.
>
> Man the weather is taking a toll on cars lately. If it's not
> the heat, it's the snow. If it's not snowing, someone is
> recovering from a flood.
>
> "Roger" <roger@roger,net > wrote
>> Hey all, water seeped up through the floorboard of my 2000
>> Accord during
>> a flood last summer; now I'm having a big problem with an
>> increasingly
>> bad odor. Any suggestions for how to get rid of it (not
>> the car, the
>> odor :)) ?
>>
>> Thanks,
>> Rog
>
>
Unfortunately, "Febreze" won't do squat. You've probably got at least a
mildew problem - and maybe mould.
From:
http :// www .ext.vt.edu/pubs/housing/356-643/356-643.html
> Upholstered Articles, Mattresses, Carpets For upholstered articles,
> mattresses, rugs and carpets, remove loose mold from outer coverings by
> brushing with a broom or brush. Do this outdoors, if possible, to
> prevent scattering mildew spores and dust in the house. Use a vacuum
> cleaner on the surface of the article for further cleaning.
>
> If mildew remains on upholstered articles or mattresses, sponge lightly
> with a solution of detergent and warm water. If safe for the fiber,
> fabric, and finish, use a dilute solution of water and liquid chlorine
> bleach (one teaspoon bleach to one quart of cool water), applying with a
> swab directly on mildew stain. Then dab repeatedly with clean, cool
> water and blot dry. Avoid excessive rubbing as it may damage the fabric.
> In working, get as little water on the surface as possible so the
> padding and/or filling does not get wet. Keep in a dry, warm area until
> articles are fully dry.
>
> If mildew remains on carpets, use as many of the following procedures as
> are necessary:
>
> 1. Apply commercial rug cleaner (shampoo or foam). Follow directions on
> the container for use in spot removal.
>
> 2. If carpet size permits, take it outside and kill the mildew by
> exposing the back of the rug to direct sunlight. To speed up the killing
> of the mildew, lightly paint the affected back area with a solution of
> hydrogen peroxide (one part of 3 percent hydrogen peroxide to five parts
> of water) and then let the sun shine on area. For wall-to-wall carpet,
> depending upon the severity of the mildew, take up the carpet, and
> replace the pad.
>
> 3. Contact a professional carpet cleaner for advice and/or treatment. It
> may not be possible always to completely remove mildew stains.
>
> Do everything possible to dry articles quickly-using an electric fan can
> speed up the killing of the mildew. Sun and air articles, if practical,
> to stop mold growth and remove odors.