Add group to favorites
Back to post list
Send new message to group Search:
Post Subject:
Clogged Gas jet in oven
Clogged Gas jet in oven
I recently suffered a clumsy accident, knocking over a joint in my
oven, which in turn clogged the gas jets from which the flame emits.
As a consequence, I cannot get the flames to burn properly now, with
just a few little tiny flames coming on. Obviously fat has clogged
these, and I am at a loss as to how best to clean the area to restore
full function.
Has anyone else experienced this? If so I would be grateful for advice
on the most effective way to clean it.
I recently suffered a clumsy accident, knocking over a joint in my
oven, which in turn clogged the gas jets from which the flame emits.
As a consequence, I cannot get the flames to burn properly now, with
just a few little tiny flames coming on. Obviously fat has clogged
these, and I am at a loss as to how best to clean the area to restore
full function.
Has anyone else experienced this? If so I would be grateful for advice
on the most effective way to clean it.
Re: Clogged Gas jet in oven
"The Weary Wizard" <mark_holliday12@yahoo.co.uk> wrote in message
news:1165867660.684042.189440@79g2000cws.googlegroups,com ...
>I recently suffered a clumsy accident, knocking over a joint in my
> oven, which in turn clogged the gas jets from which the flame emits.
> As a consequence, I cannot get the flames to burn properly now, with
> just a few little tiny flames coming on. Obviously fat has clogged
> these, and I am at a loss as to how best to clean the area to restore
> full function.
>
> Has anyone else experienced this? If so I would be grateful for advice
> on the most effective way to clean it.
Does the burner come apart? Does it come out easily? Sounds like a job for
a wire to clean each hole out.
"The Weary Wizard" <mark_holliday12@yahoo.co.uk> wrote in message
news:1165867660.684042.189440@79g2000cws.googlegroups,com ...
>I recently suffered a clumsy accident, knocking over a joint in my
> oven, which in turn clogged the gas jets from which the flame emits.
> As a consequence, I cannot get the flames to burn properly now, with
> just a few little tiny flames coming on. Obviously fat has clogged
> these, and I am at a loss as to how best to clean the area to restore
> full function.
>
> Has anyone else experienced this? If so I would be grateful for advice
> on the most effective way to clean it.
Does the burner come apart? Does it come out easily? Sounds like a job for
a wire to clean each hole out.
