Brazing questions (don't laugh)

Re: Brazing questions (don't laugh)

On May 2, 10:16 am, JayC <j...@sysmatrix,net > wrote:
> (From Wikipedea - FYI)
>
> Soldering is distinguished from brazing by use of a lower melting-
> temperature filler metal; it is distinguished from welding by the base
> metals not being melted during the joining process.
>
> So, brazing and soldering are the same, brazing is just hotter.
> Eeeeenteresting...but stupid.
>
> JayC


Now, for it to be brazing, does a certain amount of alloying have to
occur between the base metal and the filler?
I've heard it both ways.

Dave

Re: Brazing questions (don't laugh)

On May 2, 10:16 am, JayC <j...@sysmatrix,net > wrote:
> (From Wikipedea - FYI)
>
> Soldering is distinguished from brazing by use of a lower melting-
> temperature filler metal; it is distinguished from welding by the base
> metals not being melted during the joining process.
>
> So, brazing and soldering are the same, brazing is just hotter.
> Eeeeenteresting...but stupid.
>
> JayC

If you want stupid... find some stuffy old sailor and get into it over
the difference between rope and line... :)

Re: Brazing questions (don't laugh)

only rope is on the dinner bell, right?

"dsc-ky" <Dudley.Cornman@eku.edu> wrote in message
news:a0123319-1539-4072-af49-68b3b52c533c@m3g2000hsc.googlegroups,com ...
On May 2, 10:16 am, JayC <j...@sysmatrix,net > wrote:
> (From Wikipedea - FYI)
>
> Soldering is distinguished from brazing by use of a lower melting-
> temperature filler metal; it is distinguished from welding by the base
> metals not being melted during the joining process.
>
> So, brazing and soldering are the same, brazing is just hotter.
> Eeeeenteresting...but stupid.
>
> JayC

If you want stupid... find some stuffy old sailor and get into it over
the difference between rope and line... :)

Re: Brazing questions (don't laugh)

On May 3, 10:54 am, "john" <johnrSNI...@gmailTUCK.con> wrote:
> only rope is on the dinner bell, right?

Jane... you ignorant slut. Rope is what you buy on a spool at the
store. Once you cut it and give it a job by attaching it to a dinner
bell or anchor it magically becomes line... :)

Re: Brazing questions (don't laugh)

an old sailor showing the young sailor the ropes
gives him a line to use in the bar...

"dsc-ky" <Dudley.Cornman@eku.edu> wrote in message
news:88c7e2d1-0a8f-47df-a38b-f158098de0a9@w74g2000hsh.googlegroups,com ...
On May 3, 10:54 am, "john" <johnrSNI...@gmailTUCK.con> wrote:
> only rope is on the dinner bell, right?

Jane... you ignorant slut. Rope is what you buy on a spool at the
store. Once you cut it and give it a job by attaching it to a dinner
bell or anchor it magically becomes line... :)

Re: Brazing questions (don't laugh)

"dsc-ky" <Dudley.Cornman@eku.edu> wrote in message
news:a7776d0f-a5a3-4257-a944-705dcb7d5aef@l64g2000hse.googlegroups,com ...
On May 1, 9:05 pm, Outlaw_F...@hotmail,com wrote:
> I couldn't resist !!! Comedy from 2005 !!!

It's official. I hate you. ;)

Re: Brazing questions (don't laugh)

On Fri, 2 May 2008 12:49:59 -0700, "Rider" <noone@nowhere,com > wrote:

>"dsc-ky" <Dudley.Cornman@eku.edu> wrote in message
>news:a7776d0f-a5a3-4257-a944-705dcb7d5aef@l64g2000hse.googlegroups,com ...
>On May 1, 9:05 pm, Outlaw_F...@hotmail,com wrote:
>> I couldn't resist !!! Comedy from 2005 !!!
>
>It's official. I hate you. ;)
>

ROFL! I didn't put him up to it, I swear. ;-p


Fred Bradford - CrashTestDummy
fjbradfordREMOVE@tx.rr,com

Re: Brazing questions (don't laugh)


"CrashTestDummy" <FBRADFORDremove@tx.rr,com > wrote in message
> ROFL! I didn't put him up to it, I swear. ;-p

Are you sure? You seem different since your BMX mishap. Slightly more evil.
:)




I'm laughing it all off. Must be getting mellow in my old age.

Re: Brazing questions (don't laugh)

On Fri, 2 May 2008 19:54:55 -0700, "Rider" <noone@nowhere,com > wrote:

>
>"CrashTestDummy" <FBRADFORDremove@tx.rr,com > wrote in message
>> ROFL! I didn't put him up to it, I swear. ;-p
>
>Are you sure? You seem different since your BMX mishap. Slightly more evil.

What can I say, I have more time on my hands... and evil comes so
natural ;->



Fred Bradford - CrashTestDummy
fjbradfordREMOVE@tx.rr,com

Re: Brazing questions (don't laugh)

On Thu, 1 May 2008 18:05:01 -0700 (PDT), Outlaw_Frog@hotmail,com
wrote:

>
> Jeff
> Arizona / Colorado ....
>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Hi Jeff! Glad to see you're still lurking around! The RM swingarm
is holding up splendidly. Of course, that may be because it seldom
gets used ;-p Thanks again for helping me get it braz---errr...
welded! ;->

PS -- How's the Jeep?


Fred Bradford - CrashTestDummy
fjbradfordREMOVE@tx.rr,com

Re: Brazing questions (don't laugh)


"CrashTestDummy" <FBRADFORDremove@tx.rr,com > wrote in message
Snipped it!

For a split second, I thought this thread was going to be about me. ;)