Add group to favorites
Back to post list
Send new message to group Search:
Post Subject:
Spare Parts?
Spare Parts?
Well, I got my new project opened up and it's a tad more serious than
a sheared key in the oil pump(although, the key is damn sure sheared).
Before I go spend money on e-bay, does anybody have a good cam and set
of lifters for an '87 Evo laying around doing nothing?
Stock take-offs would be fine, too bad for me though, it had an EV-46
in it.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
Well, I got my new project opened up and it's a tad more serious than
a sheared key in the oil pump(although, the key is damn sure sheared).
Before I go spend money on e-bay, does anybody have a good cam and set
of lifters for an '87 Evo laying around doing nothing?
Stock take-offs would be fine, too bad for me though, it had an EV-46
in it.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
Re: Spare Parts?
Old Crow wrote:
> Well, I got my new project opened up and it's a tad more serious than
> a sheared key in the oil pump(although, the key is damn sure sheared).
>
> Before I go spend money on e-bay, does anybody have a good cam and set
> of lifters for an '87 Evo laying around doing nothing?
>
> Stock take-offs would be fine, too bad for me though, it had an EV-46
> in it.
Wally , Falcon Sales (might be listed as falconglobal)) is who I got
lifters from on ebay . Right around fifty bucks a set, and they look pretty
good to me . Check the inboard bearing ...
Is the oil pump alright ?
--
Snag
'90 Ultra "Strider"
'39 WLDD "Popcycle"
Buncha cars and a truck
Old Crow wrote:
> Well, I got my new project opened up and it's a tad more serious than
> a sheared key in the oil pump(although, the key is damn sure sheared).
>
> Before I go spend money on e-bay, does anybody have a good cam and set
> of lifters for an '87 Evo laying around doing nothing?
>
> Stock take-offs would be fine, too bad for me though, it had an EV-46
> in it.
Wally , Falcon Sales (might be listed as falconglobal)) is who I got
lifters from on ebay . Right around fifty bucks a set, and they look pretty
good to me . Check the inboard bearing ...
Is the oil pump alright ?
--
Snag
'90 Ultra "Strider"
'39 WLDD "Popcycle"
Buncha cars and a truck
Re: Spare Parts?
On Thu, 22 May 2008 05:19:54 -0500, "Terry Coombs"
<snagone@bellsouth,net > wrote:
>Old Crow wrote:
>> Well, I got my new project opened up and it's a tad more serious than
>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>
>> Before I go spend money on e-bay, does anybody have a good cam and set
>> of lifters for an '87 Evo laying around doing nothing?
>>
>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>> in it.
>
> Wally , Falcon Sales (might be listed as falconglobal)) is who I got
>lifters from on ebay . Right around fifty bucks a set, and they look pretty
>good to me . Check the inboard bearing ...
> Is the oil pump alright ?
Heh, the bike has adjustable push rods, the Andrews cam and a
Torrington inner bearing. I suppose they chose to just re-use the
bearings. It sheard the key at the drive gear and I'm having a hell
of a time getting the shaft out without fuckin' it all up, but I'm
patient and will perservere. The rest of the pump looks good, but
I'll check it over*real*good before I put it back together.
Gonna put that 302 in that green Ford p/u this weekend and see if I
can't get it running well enough to clear it outa the yard and make a
little cash.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
On Thu, 22 May 2008 05:19:54 -0500, "Terry Coombs"
<snagone@bellsouth,net > wrote:
>Old Crow wrote:
>> Well, I got my new project opened up and it's a tad more serious than
>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>
>> Before I go spend money on e-bay, does anybody have a good cam and set
>> of lifters for an '87 Evo laying around doing nothing?
>>
>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>> in it.
>
> Wally , Falcon Sales (might be listed as falconglobal)) is who I got
>lifters from on ebay . Right around fifty bucks a set, and they look pretty
>good to me . Check the inboard bearing ...
> Is the oil pump alright ?
Heh, the bike has adjustable push rods, the Andrews cam and a
Torrington inner bearing. I suppose they chose to just re-use the
bearings. It sheard the key at the drive gear and I'm having a hell
of a time getting the shaft out without fuckin' it all up, but I'm
patient and will perservere. The rest of the pump looks good, but
I'll check it over*real*good before I put it back together.
Gonna put that 302 in that green Ford p/u this weekend and see if I
can't get it running well enough to clear it outa the yard and make a
little cash.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
Re: Spare Parts?
Old Crow wrote
> Gonna put that 302 in that green Ford p/u this weekend and see if I
> can't get it running well enough to clear it outa the yard and make a
> little cash.
And get one less project sittin' in the yard ? Talkin' about fleets , I'm
pretty sure we qualify here . Well , the guy at O'Really gives me a fleet
discount ...
--
Snag
'90 Ultra "Strider"
'39 WLDD "Popcycle"
Buncha cars and a truck
Old Crow wrote
> Gonna put that 302 in that green Ford p/u this weekend and see if I
> can't get it running well enough to clear it outa the yard and make a
> little cash.
And get one less project sittin' in the yard ? Talkin' about fleets , I'm
pretty sure we qualify here . Well , the guy at O'Really gives me a fleet
discount ...
--
Snag
'90 Ultra "Strider"
'39 WLDD "Popcycle"
Buncha cars and a truck
Re: Spare Parts?
Old Crow wrote:
> Well, I got my new project opened up and it's a tad more serious than
> a sheared key in the oil pump(although, the key is damn sure sheared).
>
> Before I go spend money on e-bay, does anybody have a good cam and set
> of lifters for an '87 Evo laying around doing nothing?
>
> Stock take-offs would be fine, too bad for me though, it had an EV-46
> in it.
I'll look for the original cam that came in my old '88 FLHS - I seem to
remember it came with the bike in a box. Give me a day or so...
--
JMark
Old Crow wrote:
> Well, I got my new project opened up and it's a tad more serious than
> a sheared key in the oil pump(although, the key is damn sure sheared).
>
> Before I go spend money on e-bay, does anybody have a good cam and set
> of lifters for an '87 Evo laying around doing nothing?
>
> Stock take-offs would be fine, too bad for me though, it had an EV-46
> in it.
I'll look for the original cam that came in my old '88 FLHS - I seem to
remember it came with the bike in a box. Give me a day or so...
--
JMark
Re: Spare Parts?
JMark wrote:
> Old Crow wrote:
>> Well, I got my new project opened up and it's a tad more serious than
>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>
>> Before I go spend money on e-bay, does anybody have a good cam and set
>> of lifters for an '87 Evo laying around doing nothing?
>>
>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>> in it.
>
> I'll look for the original cam that came in my old '88 FLHS - I seem to
> remember it came with the bike in a box. Give me a day or so...
Still have it. I seem to remember that the original was replaced by an
Andrews EV13 and the original went in the Andrews box. If you want it -
let me know.
--
JMark
JMark wrote:
> Old Crow wrote:
>> Well, I got my new project opened up and it's a tad more serious than
>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>
>> Before I go spend money on e-bay, does anybody have a good cam and set
>> of lifters for an '87 Evo laying around doing nothing?
>>
>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>> in it.
>
> I'll look for the original cam that came in my old '88 FLHS - I seem to
> remember it came with the bike in a box. Give me a day or so...
Still have it. I seem to remember that the original was replaced by an
Andrews EV13 and the original went in the Andrews box. If you want it -
let me know.
--
JMark
Re: Spare Parts?
On Thu, 22 May 2008 17:56:02 -0400, JMark <woof@noaddy.rom> wrote:
>JMark wrote:
>> Old Crow wrote:
>>> Well, I got my new project opened up and it's a tad more serious than
>>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>>
>>> Before I go spend money on e-bay, does anybody have a good cam and set
>>> of lifters for an '87 Evo laying around doing nothing?
>>>
>>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>>> in it.
>>
>> I'll look for the original cam that came in my old '88 FLHS - I seem to
>> remember it came with the bike in a box. Give me a day or so...
>
>Still have it. I seem to remember that the original was replaced by an
>Andrews EV13 and the original went in the Andrews box. If you want it -
>let me know.
If Fins can't find that Sifton, I'll definitly take you up on it...in
fact, send it anyway if you want...I've got lots of shelf room<g>.
Reply to address is good, or my address etc in the SENS database is
good.
Thankyouverymuch
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
On Thu, 22 May 2008 17:56:02 -0400, JMark <woof@noaddy.rom> wrote:
>JMark wrote:
>> Old Crow wrote:
>>> Well, I got my new project opened up and it's a tad more serious than
>>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>>
>>> Before I go spend money on e-bay, does anybody have a good cam and set
>>> of lifters for an '87 Evo laying around doing nothing?
>>>
>>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>>> in it.
>>
>> I'll look for the original cam that came in my old '88 FLHS - I seem to
>> remember it came with the bike in a box. Give me a day or so...
>
>Still have it. I seem to remember that the original was replaced by an
>Andrews EV13 and the original went in the Andrews box. If you want it -
>let me know.
If Fins can't find that Sifton, I'll definitly take you up on it...in
fact, send it anyway if you want...I've got lots of shelf room<g>.
Reply to address is good, or my address etc in the SENS database is
good.
Thankyouverymuch
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
Re: Spare Parts?
Old Crow wrote:
> On Thu, 22 May 2008 17:56:02 -0400, JMark <woof@noaddy.rom> wrote:
<snip>
>> Still have it. I seem to remember that the original was replaced by an
>> Andrews EV13 and the original went in the Andrews box. If you want it -
>> let me know.
>
> If Fins can't find that Sifton, I'll definitly take you up on it...in
> fact, send it anyway if you want...I've got lots of shelf room<g>.
> Reply to address is good, or my address etc in the SENS database is
> good.
SENS database?
<AOL voice on> You've got mail! <AOL voice off>
> Thankyouverymuch
Youarewelcomeverymuch
--
JMark
Old Crow wrote:
> On Thu, 22 May 2008 17:56:02 -0400, JMark <woof@noaddy.rom> wrote:
<snip>
>> Still have it. I seem to remember that the original was replaced by an
>> Andrews EV13 and the original went in the Andrews box. If you want it -
>> let me know.
>
> If Fins can't find that Sifton, I'll definitly take you up on it...in
> fact, send it anyway if you want...I've got lots of shelf room<g>.
> Reply to address is good, or my address etc in the SENS database is
> good.
SENS database?
<AOL voice on> You've got mail! <AOL voice off>
> Thankyouverymuch
Youarewelcomeverymuch
--
JMark
Re: Spare Parts?
I have a set of lifters off a 94 Wide Glide. They have 60,000 miles on them
but look and sounded good. I don't remember any play in the axles. If you
want em , let me know.
Noob
"Old Crow" <walliscrow@yahoo,com > wrote in message
news:hbfa34pm44g0ui9tdr03b9b492qsopb0b7@4ax,com ...
> Well, I got my new project opened up and it's a tad more serious than
> a sheared key in the oil pump(although, the key is damn sure sheared).
>
> Before I go spend money on e-bay, does anybody have a good cam and set
> of lifters for an '87 Evo laying around doing nothing?
>
> Stock take-offs would be fine, too bad for me though, it had an EV-46
> in it.
> --
> Old Crow
> '82 FLTC(P)
> '87 FLTC
> '95 Wrangler YJ
> BS#132, TOMKAT, SENS, SLOB#13
> ** Posted from http :// www .teranews,com **
I have a set of lifters off a 94 Wide Glide. They have 60,000 miles on them
but look and sounded good. I don't remember any play in the axles. If you
want em , let me know.
Noob
"Old Crow" <walliscrow@yahoo,com > wrote in message
news:hbfa34pm44g0ui9tdr03b9b492qsopb0b7@4ax,com ...
> Well, I got my new project opened up and it's a tad more serious than
> a sheared key in the oil pump(although, the key is damn sure sheared).
>
> Before I go spend money on e-bay, does anybody have a good cam and set
> of lifters for an '87 Evo laying around doing nothing?
>
> Stock take-offs would be fine, too bad for me though, it had an EV-46
> in it.
> --
> Old Crow
> '82 FLTC(P)
> '87 FLTC
> '95 Wrangler YJ
> BS#132, TOMKAT, SENS, SLOB#13
> ** Posted from http :// www .teranews,com **
Re: Spare Parts?
On Thu, 22 May 2008 09:24:45 -0400, "Kim Neubert" <kneubert@gmail,com >
wrote:
>I have a set of lifters off a 94 Wide Glide. They have 60,000 miles on them
>but look and sounded good. I don't remember any play in the axles. If you
>want em , let me know.
>
>Noob
>
Yessir, they'll work just fine. My contact info is in the SENS
database, or the reply to address here is good.
I just wanna ride some this summer whilst the shovel is being
refurbished.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
On Thu, 22 May 2008 09:24:45 -0400, "Kim Neubert" <kneubert@gmail,com >
wrote:
>I have a set of lifters off a 94 Wide Glide. They have 60,000 miles on them
>but look and sounded good. I don't remember any play in the axles. If you
>want em , let me know.
>
>Noob
>
Yessir, they'll work just fine. My contact info is in the SENS
database, or the reply to address here is good.
I just wanna ride some this summer whilst the shovel is being
refurbished.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
Re: Spare Parts?
"Old Crow" wrote
> I just wanna ride some this summer whilst the shovel is being
> refurbished.
If you really get in a bind I'm sure Katie would loan you her
honda scooter. I does really good on gravel roads, but you
and Lynn might look a little sill on it......................@ 25 mph.
--
"frito"
Fred Snetzer
'01 FLHT, '97 M2²
TOMKAT
IBA #10549 BS #162
http :// users.ipa,net /~frito/
http :// eddiekieger,com /
"Old Crow" wrote
> I just wanna ride some this summer whilst the shovel is being
> refurbished.
If you really get in a bind I'm sure Katie would loan you her
honda scooter. I does really good on gravel roads, but you
and Lynn might look a little sill on it......................@ 25 mph.
--
"frito"
Fred Snetzer
'01 FLHT, '97 M2²
TOMKAT
IBA #10549 BS #162
http :// users.ipa,net /~frito/
http :// eddiekieger,com /
Re: Spare Parts?
On Fri, 23 May 2008 11:59:28 -0500, "frito" <frito@ipa,net > wrote:
>
>
>"Old Crow" wrote
>
>> I just wanna ride some this summer whilst the shovel is being
>> refurbished.
>
>If you really get in a bind I'm sure Katie would loan you her
>honda scooter. I does really good on gravel roads, but you
>and Lynn might look a little sill on it......................@ 25 mph.
Hell, Pete already offered me the Sporty for a while. That'd probably
be more like it.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
On Fri, 23 May 2008 11:59:28 -0500, "frito" <frito@ipa,net > wrote:
>
>
>"Old Crow" wrote
>
>> I just wanna ride some this summer whilst the shovel is being
>> refurbished.
>
>If you really get in a bind I'm sure Katie would loan you her
>honda scooter. I does really good on gravel roads, but you
>and Lynn might look a little sill on it......................@ 25 mph.
Hell, Pete already offered me the Sporty for a while. That'd probably
be more like it.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
Re: Spare Parts?
Old Crow wrote:
> Well, I got my new project opened up and it's a tad more serious than
> a sheared key in the oil pump(although, the key is damn sure sheared).
>
> Before I go spend money on e-bay, does anybody have a good cam and set
> of lifters for an '87 Evo laying around doing nothing?
>
> Stock take-offs would be fine, too bad for me though, it had an EV-46
> in it.
> --
I may have a used Sifton 143 cam laying around, I'll check.
Fins BS#221
Old Crow wrote:
> Well, I got my new project opened up and it's a tad more serious than
> a sheared key in the oil pump(although, the key is damn sure sheared).
>
> Before I go spend money on e-bay, does anybody have a good cam and set
> of lifters for an '87 Evo laying around doing nothing?
>
> Stock take-offs would be fine, too bad for me though, it had an EV-46
> in it.
> --
I may have a used Sifton 143 cam laying around, I'll check.
Fins BS#221
Re: Spare Parts?
On Thu, 22 May 2008 06:52:50 -0700, DM <fins@nospam.bs221,com > wrote:
>Old Crow wrote:
>> Well, I got my new project opened up and it's a tad more serious than
>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>
>> Before I go spend money on e-bay, does anybody have a good cam and set
>> of lifters for an '87 Evo laying around doing nothing?
>>
>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>> in it.
>> --
>
>I may have a used Sifton 143 cam laying around, I'll check.
>
>Fins BS#221
Yessir, I'd like that just fine, thank you. You know where I is.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
On Thu, 22 May 2008 06:52:50 -0700, DM <fins@nospam.bs221,com > wrote:
>Old Crow wrote:
>> Well, I got my new project opened up and it's a tad more serious than
>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>
>> Before I go spend money on e-bay, does anybody have a good cam and set
>> of lifters for an '87 Evo laying around doing nothing?
>>
>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>> in it.
>> --
>
>I may have a used Sifton 143 cam laying around, I'll check.
>
>Fins BS#221
Yessir, I'd like that just fine, thank you. You know where I is.
--
Old Crow
'82 FLTC(P)
'87 FLTC
'95 Wrangler YJ
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http :// www .teranews,com **
Re: Spare Parts?
Old Crow wrote:
> On Thu, 22 May 2008 06:52:50 -0700, DM <fins@nospam.bs221,com > wrote:
>
>> Old Crow wrote:
>>> Well, I got my new project opened up and it's a tad more serious than
>>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>>
>>> Before I go spend money on e-bay, does anybody have a good cam and set
>>> of lifters for an '87 Evo laying around doing nothing?
>>>
>>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>>> in it.
>>> --
>> I may have a used Sifton 143 cam laying around, I'll check.
>>
>> Fins BS#221
>
> Yessir, I'd like that just fine, thank you. You know where I is.
> --
> Old Crow
> '82 FLTC(P)
> '87 FLTC
> '95 Wrangler YJ
> BS#132, TOMKAT, SENS, SLOB#13
> ** Posted from http :// www .teranews,com **
I thought I had your address around here somewhere. Send it to Vina,
she'll get it packaged and off to you. Pulled it out of storage this
morning. Her address is
v i n a "at" sign-tek dot com
or send it to me at
fins at bs221 dot com
Fins BS#221
Old Crow wrote:
> On Thu, 22 May 2008 06:52:50 -0700, DM <fins@nospam.bs221,com > wrote:
>
>> Old Crow wrote:
>>> Well, I got my new project opened up and it's a tad more serious than
>>> a sheared key in the oil pump(although, the key is damn sure sheared).
>>>
>>> Before I go spend money on e-bay, does anybody have a good cam and set
>>> of lifters for an '87 Evo laying around doing nothing?
>>>
>>> Stock take-offs would be fine, too bad for me though, it had an EV-46
>>> in it.
>>> --
>> I may have a used Sifton 143 cam laying around, I'll check.
>>
>> Fins BS#221
>
> Yessir, I'd like that just fine, thank you. You know where I is.
> --
> Old Crow
> '82 FLTC(P)
> '87 FLTC
> '95 Wrangler YJ
> BS#132, TOMKAT, SENS, SLOB#13
> ** Posted from http :// www .teranews,com **
I thought I had your address around here somewhere. Send it to Vina,
she'll get it packaged and off to you. Pulled it out of storage this
morning. Her address is
v i n a "at" sign-tek dot com
or send it to me at
fins at bs221 dot com
Fins BS#221
