Add group to favorites
Back to post list
Send new message to group Search:
Post Subject:
Canon PowerShot S80 Problem \ Repair Needed Options
Canon PowerShot S80 Problem \ Repair Needed Options
As a follow up to my prior POST in Aug 2007
I was not able to fix it. I sent it to a repair place and was told:
THE TECHNICIAN HAS FOUND THAT THERE IS
CORROSION ON THE MAIN CIRCUIT CONNECTORS ON THE
FLASH CIRCUIT BOARD. THIS PART WILL NEED TO BE
REPLACED. THE COST TO REPAIR IS LISTED, AND
AUTHORIZATION IS REQUIRED TO PROCEED.
PLEASE LET ME KNOW. THANK YOU.
INT-102-DIG INT. DIGITAL REPAIR 125.00
INT-102-PRT INT. PARTS / SUPPLIES 65.00
SHIPPING SHIPPING 15.00
----------------------------------------
TOTAL REPAIR $205.00
I do not know the cause of the corrosion....the camera was treated
very well.
Hope this helps someone else.
-John
As a follow up to my prior POST in Aug 2007
I was not able to fix it. I sent it to a repair place and was told:
THE TECHNICIAN HAS FOUND THAT THERE IS
CORROSION ON THE MAIN CIRCUIT CONNECTORS ON THE
FLASH CIRCUIT BOARD. THIS PART WILL NEED TO BE
REPLACED. THE COST TO REPAIR IS LISTED, AND
AUTHORIZATION IS REQUIRED TO PROCEED.
PLEASE LET ME KNOW. THANK YOU.
INT-102-DIG INT. DIGITAL REPAIR 125.00
INT-102-PRT INT. PARTS / SUPPLIES 65.00
SHIPPING SHIPPING 15.00
----------------------------------------
TOTAL REPAIR $205.00
I do not know the cause of the corrosion....the camera was treated
very well.
Hope this helps someone else.
-John
Re: Canon PowerShot S80 Problem \ Repair Needed Options
The "corrosion" would have to be severe to require replacement. If the
camera was not exposed to unusual conditions, you likely have a unit that
was not cleaned or sealed properly from the factory.
Forty years ago, I had a Nikon zoom lens for my FT-N. It started growing
green stuff on the inside. It was returned to Nikon (I was in the Navy in
Japan at the time) and Nikon rebuilt the lens, apologized, and sent the as
tested tech specs for the individual lens, showing that it (after repair)
exceeded the minimum (advertised) specs by quite a bit. It was a lot
sharper after the repair, and the zoom function was much smoother.
<falcone71@gmail . com > wrote in message
news:d003bd2c-e94d-40ab-bae6-0a06786925ce@d62g2000hsf.googlegroups . com ...
> As a follow up to my prior POST in Aug 2007
>
> I was not able to fix it. I sent it to a repair place and was told:
>
>
> THE TECHNICIAN HAS FOUND THAT THERE IS
> CORROSION ON THE MAIN CIRCUIT CONNECTORS ON THE
> FLASH CIRCUIT BOARD. THIS PART WILL NEED TO BE
> REPLACED. THE COST TO REPAIR IS LISTED, AND
> AUTHORIZATION IS REQUIRED TO PROCEED.
> PLEASE LET ME KNOW. THANK YOU.
> INT-102-DIG INT. DIGITAL REPAIR 125.00
> INT-102-PRT INT. PARTS / SUPPLIES 65.00
> SHIPPING SHIPPING 15.00
> ----------------------------------------
> TOTAL REPAIR $205.00
>
> I do not know the cause of the corrosion....the camera was treated
> very well.
> Hope this helps someone else.
> -John
The "corrosion" would have to be severe to require replacement. If the
camera was not exposed to unusual conditions, you likely have a unit that
was not cleaned or sealed properly from the factory.
Forty years ago, I had a Nikon zoom lens for my FT-N. It started growing
green stuff on the inside. It was returned to Nikon (I was in the Navy in
Japan at the time) and Nikon rebuilt the lens, apologized, and sent the as
tested tech specs for the individual lens, showing that it (after repair)
exceeded the minimum (advertised) specs by quite a bit. It was a lot
sharper after the repair, and the zoom function was much smoother.
<falcone71@gmail . com > wrote in message
news:d003bd2c-e94d-40ab-bae6-0a06786925ce@d62g2000hsf.googlegroups . com ...
> As a follow up to my prior POST in Aug 2007
>
> I was not able to fix it. I sent it to a repair place and was told:
>
>
> THE TECHNICIAN HAS FOUND THAT THERE IS
> CORROSION ON THE MAIN CIRCUIT CONNECTORS ON THE
> FLASH CIRCUIT BOARD. THIS PART WILL NEED TO BE
> REPLACED. THE COST TO REPAIR IS LISTED, AND
> AUTHORIZATION IS REQUIRED TO PROCEED.
> PLEASE LET ME KNOW. THANK YOU.
> INT-102-DIG INT. DIGITAL REPAIR 125.00
> INT-102-PRT INT. PARTS / SUPPLIES 65.00
> SHIPPING SHIPPING 15.00
> ----------------------------------------
> TOTAL REPAIR $205.00
>
> I do not know the cause of the corrosion....the camera was treated
> very well.
> Hope this helps someone else.
> -John
Next: CHDK Now Supports 25 Canon Powershot Models
Previous: EYE catching design...Olympus Limited Edition Mju 1020 Digicam....
